A faucet having low water pressure is the major problem because it takes too much time to finish the work. If it is a high water pressure means it all messed up with all our work so low and high water pressure is very dangerous to our house. But fortunately, we have quick remedies to resolve these kinds of problems without calling the plumber.
First, we have to find the pressure level if it is low means the possibility of your faucet aerator is clogged. An aerator is a process by which the air is circulated through, mixed with or dissolved in a liquid. If it is high pressure means if your faucet may not be fitted with an aerator. All the sinks must contain two valves on the water lines one for hot water and another for cold water.
Those valves are fixed in under your sink, in case you have to repair the valves means first shutting off the valves. Remove the aerator if the pressure is too low this is the only way to solve low-pressure water but this method is not that much easy. Try to remove the aerator with a pair of pliers, first grip the aerator in the pliers and twist but keep in mind don’t scratch the metal.
Pliers are not worked in remove the aerators means use vinegar as an alternative, tie the vinegar liquid to the faucet and leave it for a few hours. Then remove the vinegar from the faucet, then the aerator will remove easily. Vinegar also doesn’t work means spray the WD-40, then try the pliers again to take it off the aerator.
After removing the aerator, again soak it in vinegar because it may contain a lot of corroded parts if you soak it in a vinegar means it may go. After the vinegar soaks again fix the aerator to the faucet check the water pressure level. The water pressure level is too high means your faucet doesn’t contain aerators and the speed of water is also too high.
Just see the end of the faucet, you can see the fine wire mesh means you have an aerator. If you aerator side you can see these kinds of printed letters gallons or liters per minute. In America the using all new faucets having 2.2 gallons per minute aerator. If you want low water pressure in the house mean buy lower flow aerator. But try always remember you have to check the flow level of the aerator
In your house always check the level of your water pressure, if it is low or high are dangerous to the faucet. Use the modern valves because it prevents corroded valves and once you feel you are having low-pressure water means try it whatever tricks you know it does not work it properly means call a professional plumber to recover the faucet. If you are not taking in serious means it may affect your entire house.
Comments (No)